Driveway Cleaning
Lift oil stains, tyre marks, mould and grime from concrete, exposed aggregate and paved driveways across the Northern Beaches. Call Northern Beaches Pressure Cleaning Pros today!
Learn More →
Deck Cleaning on the Northern Beaches, NSW
Careful cleaning for timber and composite decks that removes grey weathering, mould and slippery build-up, ready for oiling. Call Northern Beaches Pressure Cleaning Pros today!
Request a Free Quote
Timber and Composite Deck Cleaning for Salt-Air Homes on the Northern Beaches
A deck takes more punishment than almost any other surface around your home. Salt spray, coastal humidity and leaf litter from overhanging gums all settle into the boards. On the Northern Beaches, it doesn't take long for a hardwood deck to turn grey, go slippery near the shady corners and pick up black mould spots along the board edges. Western Sydney decks deal mostly with dry heat and UV. Ours stay damp for longer, so mould and algae get a real foothold.
Timber needs a gentler touch than concrete. Blasting a hardwood deck with a turbo nozzle tears up the soft grain and leaves the surface fuzzy, a problem called furring. We work at low pressure with a wide fan tip, always following the grain, and use a timber-safe deck cleaner to break down mould, algae and grime before we rinse. For tannin stains and greying on hardwoods like spotted gum, merbau and blackbutt, we apply a timber brightener that brings back the natural colour without sanding.
Picture the deck off your back door where the barbecue sits. It has grease spots near the grill, dark rings from pot plants and a green film under the eaves where the sun never reaches. We treat each of those problems separately instead of hitting the whole deck with one setting. While we're on site, plenty of customers have us do house washing to clear the same salt and mould from the walls above, or paver and sandstone cleaning for the steps and paths that lead down to the yard.
- Low-pressure fan-tip washing that follows the timber grain
- Mould, algae and black spot treatment for shaded deck areas
- Timber brightener for tannin stains and grey, weathered hardwood
- Degreasing around barbecue areas and outdoor kitchens
- Soft cleaning for composite and capped decking boards
- Cleaning of balustrades, handrails, deck stairs and steps
- Clearing grime and organic build-up from board gaps
- Surface prep so your deck is ready for re-oiling or staining
How We Clean Timber and Composite Decks Without Damaging the Boards
Low pressure, the right cleaner and working with the grain, from inspection to final rinse.
Step 1: Deck Inspection and Surface Check
We walk the deck and work out what it's made of, whether that's hardwood, treated pine or composite. We look for loose boards, raised nail heads, old coatings and soft or rotting timber. That tells us which cleaner and pressure setting the deck can handle.
Step 2: Pre-Treatment of Mould, Grease and Stains
We sweep off leaves and debris, then cover nearby plants and protect any doors or glass. A timber-safe cleaner goes on and sits on the boards to loosen mould, algae and grime. Barbecue grease spots get a separate degreaser treatment.
Step 3: Low-Pressure Wash Along the Grain
We rinse the deck using a wide fan tip at low pressure, working board by board in the direction of the grain. This lifts the loosened grime without furring the timber. We flush out the gaps between boards as we go so debris doesn't stay trapped.
Step 4: Brightening, Final Rinse and Walkthrough
Where hardwood has greyed or shows tannin marks, we apply a timber brightener to bring back the natural colour. We give everything a final rinse, including handrails and stairs. Then we walk the deck with you and give advice on drying time before you oil or stain it.
What a Professional Deck Clean Does for Your Outdoor Area
Safer, longer-lasting decking that suits coastal living.
Safer Footing Around the Pool and Back Door
Algae and mould make timber slippery, especially in shaded spots and after a sea breeze leaves the boards damp. Cleaning removes that slick film, so the deck is safer for kids, older family members and wet feet coming up from the pool.
Longer Life for Your Decking Timber
Mould and trapped organic matter hold moisture in the timber, which speeds up rot and cracking. Clearing the boards and gaps lets the deck dry out properly between damp spells. A clean surface also lets new oil or stain soak in evenly, so the coating protects the timber properly.
Natural Timber Colour Back Without Sanding
Sun and salt air turn hardwood a flat silver-grey over time. Cleaning and brightening bring back the warm tones of the original timber, often without the dust and cost of a full sand. Your outdoor area looks cared for again, which matters if you're selling or leasing.
Why Northern Beaches Homeowners Trust Us With Their Decks
We Know Coastal Timber
Salt air, humid summers and shady gum-lined blocks are standard here. We see the same mould patterns and greying on spotted gum, merbau and treated pine week after week. We set up each job for those conditions.
Timber-Safe Pressure, Every Time
We never use a turbo nozzle on deck boards. Low pressure, a wide fan tip and working with the grain protect the timber fibres, so your deck comes out smooth, not furred and splintered.
Decks, Stairs and Rails in One Visit
Grimy balustrades and stairs make a clean deck look half done. We clean the handrails, posts, steps and board gaps as part of the job, so the whole outdoor area finishes up even.
Local Crew Based in Cromer
We're based in Cromer and work right across the Northern Beaches. That means we know the steep blocks, tight side access and elevated decks common in the area, and we plan our gear around them.
Deck Cleaning Questions From Northern Beaches Homeowners
Common questions answered
Will pressure cleaning damage my timber deck?
It can if it's done with the wrong nozzle or too much pressure, which is why so many decks end up fuzzy and splintered. We use low pressure with a wide fan tip, work along the grain and let the cleaner do most of the work. Soft or rotting boards get flagged before we start.
How often should a deck be cleaned on the Northern Beaches?
It depends on how much shade, salt spray and leaf drop your deck gets. A sunny, open deck can go longer between cleans than one under trees or close to the water. If you see green or black patches, or the boards feel slippery, it's time for a clean.
What affects the cost of deck cleaning?
The main factors are the deck's size, the timber or composite type, and how much mould, grease and greying there is. Stairs, balustrades and elevated decks that need extra access also add time. We look at the deck and give you a fixed quote before any work starts.
How long should I wait after cleaning before oiling my deck?
The timber needs to dry right through before any oil or stain goes on, or the coating won't soak in properly. Drying time depends on the weather, how much sun the deck gets and the type of timber. In humid coastal conditions it usually takes longer than people expect, and we'll give you advice for your deck on the day.
Can you clean composite decking?
Yes. Composite boards don't need brightening, but they still collect mould, pollen and grime, especially in the textured grooves. We use a gentle cleaner and low pressure that suits the board surface, so the finish isn't scarred.
Deck Cleaning Service Areas
We provide Deck Cleaning throughout the Northern Beaches, NSW and surrounding suburbs.
Don't see your area? Contact us to check if we service your location!
View All Areas